SNR分层实验的分析

SVM Main Configuration File

OutputFile testSNR.264 # Bitstream file

FrameRate 30.0 # Maximum frame rate [Hz]

FramesToBeEncoded 19 # Number of frames (at input frame rate) GOPSize 16 # GOP Size (at maximum frame rate) BaseLayerMode 2 # Base layer mode (0,1: AVC compatible, # 2: AVC w subse SEI) CgsSnrRefinement 1 # SNR refinement as 1: MGS; 0: CGS EncodeKeyPictures 1 # Key pics at T=0 (0:none, 1:MGS, 2:all) MGSControl 2 # ME/MC for non-key pictures in MGS layers # (0:std, 1:ME with EL, 2:ME+MC with EL) SearchMode 4 # Search mode (0:BlockSearch, 4:FastSearch) SearchRange 32 # Search range (Full Pel)

NumLayers 4 # Number of layers

LayerCfg SNRlayer0.cfg # Layer configuration file

LayerCfg SNRlayer1.cfg # Layer configuration file

LayerCfg SNRlayer2.cfg # Layer configuration file

LayerCfg SNRlayer3.cfg # Layer configuration file

# JSVM Layer0 Configuration File

InputFile foreman_cif.yuv # Input file

SourceWidth 352 # Input frame width

SourceHeight 288 # Input frame height

FrameRateIn 30 # Input frame rate [Hz]

FrameRateOut 30 # Output frame rate [Hz]

InterLayerPred 0 # Inter-layer Pred. (0: no, 1: yes, 2:adap.)

# JSVM Layer1 Configuration File

InputFile foreman_cif.yuv # Input file

SourceWidth 352 # Input frame width

SourceHeight 288 # Input frame height

FrameRateIn 30 # Input frame rate [Hz]

FrameRateOut 30 # Output frame rate [Hz]

InterLayerPred 1 # Inter-layer Pred. (0: no, 1: yes, 2:adap.) MGSVectorMode 1 # MGS vector usage selection MGSVector0 4 # Specifies 0th position of the vector MGSVector1 4 # Specifies 1st

SVM Main Configuration File

OutputFile testSNR.264 # Bitstream file

FrameRate 30.0 # Maximum frame rate [Hz]

FramesToBeEncoded 19 # Number of frames (at input frame rate) GOPSize 16 # GOP Size (at maximum frame rate) BaseLayerMode 2 # Base layer mode (0,1: AVC compatible, # 2: AVC w subse SEI) CgsSnrRefinement 1 # SNR refinement as 1: MGS; 0: CGS EncodeKeyPictures 1 # Key pics at T=0 (0:none, 1:MGS, 2:all) MGSControl 2 # ME/MC for non-key pictures in MGS layers # (0:std, 1:ME with EL, 2:ME+MC with EL) SearchMode 4 # Search mode (0:BlockSearch, 4:FastSearch) SearchRange 32 # Search range (Full Pel)

NumLayers 4 # Number of layers

LayerCfg SNRlayer0.cfg # Layer configuration file

LayerCfg SNRlayer1.cfg # Layer configuration file

LayerCfg SNRlayer2.cfg # Layer configuration file

LayerCfg SNRlayer3.cfg # Layer configuration file

# JSVM Layer0 Configuration File

InputFile foreman_cif.yuv # Input file

SourceWidth 352 # Input frame width

SourceHeight 288 # Input frame height

FrameRateIn 30 # Input frame rate [Hz]

FrameRateOut 30 # Output frame rate [Hz]

InterLayerPred 0 # Inter-layer Pred. (0: no, 1: yes, 2:adap.)

# JSVM Layer1 Configuration File

InputFile foreman_cif.yuv # Input file

SourceWidth 352 # Input frame width

SourceHeight 288 # Input frame height

FrameRateIn 30 # Input frame rate [Hz]

FrameRateOut 30 # Output frame rate [Hz]

InterLayerPred 1 # Inter-layer Pred. (0: no, 1: yes, 2:adap.) MGSVectorMode 1 # MGS vector usage selection MGSVector0 4 # Specifies 0th position of the vector MGSVector1 4 # Specifies 1st


相关文章

  • 单光子计数实验
  • 单光子计数实验 实验日期:2012年2月28日 摘要:本实验学习以PMT 为探测器的光子技术的基本实验方法并通过实验了解光子计数方法和弱光检测中的一些特殊问题.在实验过程中,我们先初步确定甄别电平的取值范围.然后在这个范围里确定最佳甄别电平 ...查看


  • 标准实验报告(2)
  • 实 验 报 告(二) 学生姓名:王超楠 学号:[1**********]11 指导教师:廖红舒/张花国 实验地点:科研二号楼B453 实验时间:周二晚 一.实验室名称:信息对抗系统专业实验室 二.实验项目名称:典型模拟通信信号调制识别 三. ...查看


  • 直接序列扩频通信系统仿真设计
  • 南华大学 通信原理课程设计 设计题目: 专 业: 学生姓名: 起迄日期: 2015 指导教师: 系主任: 直接序列扩频通信系统仿真设计 通信工程 谭雪棋 学 号: [1**********] 年6月15日2015年6月30日 王明华 邓贤君 ...查看


  • ADC过采样
  • 什么叫过采样? 首先,考虑一个传统ADC的频域传输特性.输入一个正弦信号,然后以频率fs采样--按照 Nyquist定理,采样频率至少两倍于输入信号.从FFT分析结果可以看到,一个单音和一系列频率分布于DC到fs /2间的随机噪声.这就是所 ...查看


  • 通信原理实验
  • 通信原理实验 实验七 基于 Matlab 的模拟信号传输系统实验 实验七 基于 Matlab 的模拟信号传输系统实验 一.实验目的 1 掌握模拟幅度及角度调制/解调的原理和方法: 2 掌握常见模拟幅度及角度调制信号的波形和频谱特点: 3 掌 ...查看


  • 基本矢量量化器的性能研究
  • 第29卷第6期昆明理工大学学报(理工版) 2004年12月 Journal of Kunming University of Science and Tec hnology (Science and Technology) Vol. 29 ...查看


  • 自适应编码调制
  • 大作业 西安电子科技大学 宽带无线接入与无线IP 技术 课程作业 题目:自适应编码调制技术 学院:通信工程学院 姓名: 2015年4月28日 摘 要 摘 要 本文主要介绍了自适应编码调制技术的基本原理,讨论了所用到的信道编码和调制技术,最后 ...查看


  • 通信信号处理课程报告
  • MIMO 技术及其在下一代移动通信中的应用 一.前言: MIMO 技术是无限移动通信领域智能天线技术的重大突破.MIMO 技术能在不增加宽带的情况下,成倍的提高通信系统的容量和频谱利用率.随着世界各国对该技术的不断研究完善,我们有理由相信M ...查看


  • 最小均方误差判决和自适应判决反馈均衡器的设计实现
  • 第35卷第6期 2001年6月 上海变通大学学报 JOURNALOFSHANGHAIJIA()ToNGUNlVERSITY v01.35No.6 J-2001 文章编号:1006-2467(2001)06一0897一05 最小均方误差判决和 ...查看


热门内容