焊后外观检查记录 文件编号：YG-JY-03-2013
Testing record after welding
部件编号Part No. 检查人Inspector ： 日期date:
实际情况符合要求 备 注Remarks fulfill the requirement 项点名称Items
是Yes 否No
1、 焊缝外观质量
Surface imperfection
1.1裂纹（100） Crack
1.2 弧坑裂纹(104) Crater crack 1.3不均匀气孔（2012）
Uniformly distributed porosity 1.4密集气孔（2013）Clustered porosity 1.5链状气孔（2014）Linear porosity 1.6表面气孔（2017）Surface pore
1.7末端弧坑缩孔（2025）End crater pipe 1.8未熔合（401）Lack of fusion 1.9根部未焊透（4021）
Incomplete root penetration 1.10咬边（5011，5012）Undercut
1.11对接焊缝超高（502）Excess weld metal 1.12角接焊缝超高(503)Excessive convexity 1.13角焊缝厚度不够(5213)
Insufficient throat thickness
焊 后 检 查 记 录
Testing 1.14焊根超高(504)Excess penetration Record
1.15焊瘤(506) Overlap after
welding 1.16未焊满(509,511)
Sagging, incompletely filled groove 1.17焊角不对称(512)
Excessive asymmetry of fillet weld
1.18缩沟(515,5013)
Root concavity, Shrinkage groove
2、材料表面（不许有点火，打磨痕迹）
Material surface (No ignition or grinding marks)
3、焊缝返修情况(Repair)
4、焊接残留物去除情况(Remove the residue)
注: 符合要求的在„是‟栏打„V ‟，否则在„否‟栏打„V ‟，并在备注栏中注明具体情况。 无关内容将项目序号杠掉。
Remarks: Put a “V ” in the “Yes ” column if it fulfilled the requirement,or put a “V ” in the “No ” column and write the
reason in the “remark ” column. Cross the irrelevant items.
焊后外观检查记录 文件编号：YG-JY-03-2013
Testing record after welding
部件编号Part No. 检查人Inspector ： 日期date:
实际情况符合要求 备 注Remarks fulfill the requirement 项点名称Items
是Yes 否No
1、 焊缝外观质量
Surface imperfection
1.1裂纹（100） Crack
1.2 弧坑裂纹(104) Crater crack 1.3不均匀气孔（2012）
Uniformly distributed porosity 1.4密集气孔（2013）Clustered porosity 1.5链状气孔（2014）Linear porosity 1.6表面气孔（2017）Surface pore
1.7末端弧坑缩孔（2025）End crater pipe 1.8未熔合（401）Lack of fusion 1.9根部未焊透（4021）
Incomplete root penetration 1.10咬边（5011，5012）Undercut
1.11对接焊缝超高（502）Excess weld metal 1.12角接焊缝超高(503)Excessive convexity 1.13角焊缝厚度不够(5213)
Insufficient throat thickness
焊 后 检 查 记 录
Testing 1.14焊根超高(504)Excess penetration Record
1.15焊瘤(506) Overlap after
welding 1.16未焊满(509,511)
Sagging, incompletely filled groove 1.17焊角不对称(512)
Excessive asymmetry of fillet weld
1.18缩沟(515,5013)
Root concavity, Shrinkage groove
2、材料表面（不许有点火，打磨痕迹）
Material surface (No ignition or grinding marks)
3、焊缝返修情况(Repair)
4、焊接残留物去除情况(Remove the residue)
注: 符合要求的在„是‟栏打„V ‟，否则在„否‟栏打„V ‟，并在备注栏中注明具体情况。 无关内容将项目序号杠掉。
Remarks: Put a “V ” in the “Yes ” column if it fulfilled the requirement,or put a “V ” in the “No ” column and write the
reason in the “remark ” column. Cross the irrelevant items.